How To Descale Tommee Tippee Bottle Sterilizer

How To Descale Tommee Tippee Bottle Sterilizer? – Step By Step Guide

While using your Tommee Tippee you will start noticing limescale build-up {chalky-like deposit} on the sterilizer heat plate over time. Limescale build-up makes your sterilizer to be less effective over time and reduces its lifespan than you anticipated. To get rid of limescale build-up on the bottle sterilizer heating plate you have to descale it. Descaling is the removal of the chalky deposit and freshening the look of the heating plate to renew its effectiveness and provide you with long-lasting service. So it’s very important to know how to descale tommee tippee bottle sterilizer.

What You Need To Descale Tommee Tippee Bottle Sterilizer?

There are different methods you may employ to descale your Tommee Tippee bottle sterilizer. However, before the start, you must gather all the equipment before you use any tips we have shared below.

  • Mild dishwashing detergent
  • Pure white vinegar or Apple Cider vinegar about 2-3 cups
  • Citrus acid
  • Soft dishwashing sponge
  • A damp kitchen clothes
  • A clean and dry dishwashing cloth
  • Fresh or distilled water
  • Hot soapy water

How To Descale Tommee Tippee Bottle Sterilizer?

Below are the common methods of descaling and the steps that each entails:

Method 1: Use of Pure White Vinegar or Apple Cider Vinegar

When using vinegar to descale your sterilizer it would be wise to use pure white vinegar which is good for home appliances like sterilizers, kettles, and coffee machines. That’s because they are mildly acidic and can counteract with minerals deposits effectively. Follow the guide below to help descale the bottle sterilizer;

Step 1:

Disassemble all the removable parts and set them aside.

Step 2:

Wash all the parts including the hood using a mild dishwashing detergent/solution and then rinse them using freshwater.

Step 3:

Take 1 to 2 ounces of the pure white vinegar {100ml} mixed with 200 ml of water and put it into the base of the sterilizer.

Step 4:

Allow it to sit for about 2 hours or longer, depending on the extent of limescale formation until you observe the chalky deposit has completely dissolved.

Step 5:

Then, pour out the white vinegar and carefully rinse using fresh or distilled water until all the white vinegar residue is removed.

Step 6:

If there are any loose limescale bits left behind, use a sponge or cloth to remove them.

Step 7:

Take the sterilizer parts you initially set aside and assemble them back.

Step 8:

Fill the sterilizer with water according to Tommee Tippee manufacturer’s instructions.

Step 9:

Plugin the sterilizer into the power outlet, switch it on and set it to the normal/standard sterilization cycle.

Step 10:

Let it run for about 5-minutes and then give it a final rinse.

Method 2: Use Citric Acid-Based Descaling Agent

For this method, you may citric acid-based foods or agents. Visit nearby pharmacies and purchase citric acid. However, this method is a bit different from using pure white vinegar. Instead, follow the guide below;

Step 1:

Mix 10g of citric acid with 200ml of water and then transfer the mixture to the empty sterilizer and close while ensuring the hood and the base are tightly secured.

Step 2:

Plugin the sterilizer into the power outlet, switch and allow it to run under standard sterilization mode for a minute or two. Warming the solution helps to lessen the chalky deposit.

Step 3:

Disassemble all the removable parts and set them aside and allow the solution to sit for about 30-min to 1 hour.

Step 4:

When the time is up, pour out the citric acid solution and then run water through the sterilizer.

Step 5:

If there are any loose limescale bits left behind, use a sponge or cloth to remove them.

Step 6:

Carefully rinse using fresh or distilled water until all the white vinegar residue is removed.

Step 7:

Wipe the heating plate and other accessories dry with a clean kitchen cloth.

Step 8:

Take the sterilizer parts you initially set aside and assemble them back. You are done.

Method 3 :Descaling Sachets

Besides using citric acid and vinegar, you may also purchase descaling sachets to clean your Tommee Tippee bottle sterilizer. Descaling sachets are an effective abrasive powder that is capable of removing the limescale build-up. Each descaling sachet contains 25g powder that when mixed with water can make up a liter of descaling solution. Nevertheless, descaling sachets are less abrasive than both the citric acid and the vinegar solution but are also more precise to keep your bottle sterilizer clean, shiny, and limescale-free.

To clean and descale your bottle sterilizer using descaling sachets, you simply pour a sachet into the sterilizer with some water. Close the sterilizer, plug into the power outlet, set it to standard sterilization cycle, and allow it to run for one cycle. Then rinse the sterilizer with warm water without scrubbing. Only scrub sponge dishwasher if limescale residue is left behind.

Things To Remember During This Process

While sterilizing the soil, you have to bear these things in mind:

  • Care for the plants and the organisms that you intend to plant in the soil
  • Factor in your financial resource base
  • What about the expertise you have? Is it sufficient to tackle the chore?
  • How about the time you have at your disposal?
  • Do not forget about the protective attires like face masks, gloves, and aprons

As you descale Tommee Tippee Bottle Sterilize, be careful to stay away from the following dangers:

    • When using descaling sachets to descale or clean your bottle sterilizer it is advisable to opt for one recommended by the manufacturer or the ones designed for bottle sterilizer. That’s because some may contain harmful chemicals or excessive acids which cause damage to the sterilizer.
    • Always wash the bottle sterilizer components with warm soapy water as they are free from germs and bacteria. Therefore, you should avoid using cold water as it may contaminate the components.
    • Before assembling the bottle sterilizer components, you should wash your hand thoroughly and use a pair of nipple tongs while reassembling to keep it clean and sterile.

Final Verdict

It is advisable to descale your Tommee Tippee bottle sterilizer once every four weeks if you are using pure or distilled water to sterilize. However, you will need to clean it more frequently if the water is slightly harder or hard, but it would be wise to clean it immediately spot the chalky residues.

About The Author

Scroll to Top